patchpanelsmartyy's blog

Cat6a keystone jacks have eight metal contacts, which correspond to the eight wires in a typical Cat6a Ethernet cable. They are used to terminate the cable by stripping the wires, inserting them into the jack, and using a punchdown tool to secure the connections.

In terms of physical characteristics, Cat6a keystone jacks are often larger than Cat6 keystone jacks due to the increased size of the connectors and the thicker cables they are designed to accommodate. Additionally, Cat6a keystone jacks often require more power to operate than Cat6 keystone jacks due to the higher signal levels and increased transmission distances.

Can I use Cat6 keystone with Cat6a cable

Technically, it is possible to use a Cat6 keystone jack with Cat6a cable. However, it is not recommended because it may result in reduced performance and lower signal quality.

The primary difference between Cat6 and Cat6a cable is the bandwidth or frequency that they support. Cat6 cables are rated for up to 250 MHz, while Cat6a cables are rated for up to 500 MHz. This means that Cat6a cables are designed to handle higher speeds and longer transmission distances than Cat6 cables.

While Cat6 keystone jacks are designed to work with Cat6 cables, they may not be able to fully support the higher bandwidth and frequency of Cat6a cables. This can result in lower data transmission rates, increased signal interference, and reduced network performance overall.

For best results, it is recommended to use Cat6a keystone jacks with Cat6a cables to ensure optimal performance and reliability.

If you want to buy Keystone Jack Cat6, you must have a certain understanding. It is also very important to choose a professional faceplate manufacturers . Click https://www.smartyy.com/product/copper-system/keystone-jack/ for more information